Trading requires reference points (support and resistance), which are used to determine when to enter the market, place stops and take profits. However, many beginning traders divert too much attention to technical indicators such as moving average convergence divergence (MACD) and relative strength index (RSI) (to name a few) and fail to identify a point that defines risk. Unknown risk can lead to margin calls, but calculated risk significantly improves the odds of success over the long haul.
One tool that actually provides potential support and resistance and helps minimize risk is the pivot point and its derivatives. In this article, we'll argue why a combination of pivot points and traditional technical tools is far more powerful than technical tools alone and show how this combination can be used effectively in the FX market.
Pivot Points 101
Originally employed by floor traders on equity and futures exchanges, pivot point have proved exceptionally useful in the FX market. In fact, the projected support and resistance generated by pivot points tends to work better in FX (especially with the most liquid pairs) because the large size of the market guards against market manipulation. In essence, the FX market adheres to technical principles such as support and resistance better than less liquid markets. (For related reading, see Using Pivot Points For Predictions and Pivot Strategies: A Handy Tool.)
Calculating Pivots
Pivot points can be calculated for any time frame. That is, the previous day's prices are used to calculate the pivot point for the current trading day.
Pivot Point for Current = High (previous) + Low (previous) + Close (previous) 3 
The pivot point can then be used to calculate estimated support and resistance for the current trading day.
Resistance 1 = (2 x Pivot Point) – Low (previous period) Support 1 = (2 x Pivot Point) – High (previous period) Resistance 2 = (Pivot Point – Support 1) + Resistance 1 Support 2 = Pivot Point – (Resistance 1 – Support 1) Resistance 3 = (Pivot Point – Support 2) + Resistance 2 Support 3 = Pivot Point – (Resistance 2 – Support 2) 
To get a full understanding of how well pivot points can work, compile statistics for the EUR/USD on how distant each high and low has been from each calculated resistance (R1, R2, R3) and support level (S1, S2, S3).
To do the calculation yourself:
 Calculate the pivot points, support levels and resistance levels for x number of days.
 Subtract the support pivot points from the actual low of the day (Low – S1, Low – S2, Low – S3).
 Subtract the resistance pivot points from the actual high of the day (High – R1, High – R2, High – R3).
 Calculate the average for each difference.
The results since the inception of the euro (January 1, 1999, with the first trading day on January 4, 1999):
 The actual low is, on average, 1 pip below Support 1
 The actual high is, on average, 1 pip below Resistance 1
 The actual low is, on average, 53 pips above Support 2
 The actual high is, on average, 53 pips below Resistance 2
 The actual low is, on average, 158 pips above Support 3
 The actual high is, on average, 159 pips below Resistance 3
Judging Probabilities
The statistics indicate that the calculated pivot points of S1 and R1 are a decent gauge for the actual high and low of the trading day.
Going a step farther, we calculated the number of days that the low was lower than each S1, S2 and S3 and the number of days that the high was higher than the each R1, R2 and R3.
The result: there have been 2,026 trading days since the inception of the euro as of October 12, 2006.
 The actual low has been lower than S1 892 times, or 44% of the time
 The actual high has been higher than R1 853 times, or 42% of the time
 The actual low has been lower than S2 342 times, or 17% of the time
 The actual high has been higher than R2 354 times, or 17% of the time
 The actual low has been lower than S3 63 times, or 3% of the time
 The actual high has been higher than R3 52 times, or 3% of the time
This information is useful to a trader; if you know that the pair slips below S1 44% of the time, you can place a stop below S1 with confidence, understanding that probability is on your side. Additionally, you may want to take profits just below R1 because you know that the high for the day exceeds R1 only 42% of the time. Again, the probabilities are with you.
It is important to understand, however, that theses are probabilities and not certainties. On average, the high is 1 pip below R1 and exceeds R1 42% of the time. This neither means that the high will exceed R1 four days out of the next 10, nor that the high is always going to be 1 pip below R1. The power in this information lies in the fact that you can confidently gauge potential support and resistance ahead of time, have reference points to place stops and limits and, most importantly, limit risk while putting yourself in a position to profit.
Using the Information
The pivot point and its derivatives are potential support and resistance. The examples below show a setup using pivot point in conjunction with the popular RSI oscillator. (For more insight, see Momentum And The Relative Strength Index and Getting To Know Oscillators  Part 2: RSI.)
RSI Divergence at Pivot Resistance/Support
This is typically a high rewardtorisk trade. The risk is welldefined due to the recent high (or low for a buy).The pivot points in the above examples are calculated using weekly data. The above example shows that from August 16 to 17, R1 held as solid resistance (first circle) at 1.2854 and the RSI divergence suggested that the upside was limited. This suggests that there is an opportunity to go short on a break below R1 with a stop at the recent high and a limit at the pivot point, which is now a support:
 Sell Short at 1.2853.
 Stop at the recent high at 1.2885.
 Limit at the pivot point at 1.2784.
This first trade netted a 69 pip profit with 32 pips of risk. The reward to risk ratio was 2.16.
The next week produced nearly the exact same setup. The week began with a rally to and just above R1 at 1.2908, which was also accompanied by bearish divergence. The short signal is generated on the decline back below R1 at which point we can sell short with a stop at the recent high and a limit at the pivot point (which is now support):
 Sell short at 1.2907.
 Stop at the recent high at 1.2939.
 Limit at the pivot point at 1.2802.
This trade netted a 105 pip profit with just 32 pips of risk. The reward to risk ratio was 3.28.
The rules for the setup are simple:
For shorts:
1. Identify bearish divergence at the pivot point, either R1, R2 or R3 (most common at R1).
2. When price declines back below the reference point (it could be the pivot point, R1, R2, R3), initiate a short position with a stop at the recent swing high.
3. Place a limit (take profit) order at the next level. If you sold at R2, your first target would be R1. In this case, former resistance becomes support and vice versa.
For longs:
1. Identify bullish divergence at the pivot point, either S1, S2 or S3 (most common at S1).
2. When price rallies back above the reference point (it could be the pivot point, S1, S2, S3), initiate a long position with a stop at the recent swing low.
3. Place a limit (take profit) order at the next level (if you bought at S2, your first target would be S1 … former support becomes resistance and vice versa).
Summary
A day trader can use daily data to calculate the pivot points each day, a swing trader can use weekly data to calculate the pivot points for each week and a position trader can use monthly data to calculate the pivot points at the beginning of each month. Investors can even use yearly data to approximate significant levels for the coming year. The trading philosophy remains the same regardless of the time frame. That is, the calculated pivot points give the trader an idea of where support and resistance is for the coming period, but the trader  because nothing in trading is more important than preparedness  must always be prepared to act.

Technical Indicators
Use Market Volume Data to Determine a Bottom
Market bottoms often carve out classic volume patterns that let observant traders make fast and accurate calls. 
Forex Strategies
These Are The Best Hours To Trade the Euro
Six popular currency pairs and numerous secondary crosses offer euro traders a wide variety of short and longterm opportunities. 
Mutual Funds & ETFs
ETF Analysis: First Trust Dorsey Wright Focus 5
Take a closer look at the First Trust Dorsey Wright Focus 5 ETF, a unique and innovative fund of funds based on momentum and relative strength. 
Charts & Patterns
Understand How Square Works before the IPO
Square is reported to have filed for an IPO. For interested investors wondering how the company makes money, Investopedia takes a look at its business. 
Trading Strategies
The Top SpreadBetting Strategies
What are the most commonly followed spreadbetting strategies (in countries where it's legal)? 
Technical Indicators
4 Ways to Find a Penny Stock Worth Millions
Thinking of trading in risky penny stocks? Use this checklist to find bargains, not scams. 
Trading Strategies
Who Actually Trades or Invests In Penny Stocks?
Although penny stocks are highly speculative, millions of people trade them daily. Here are 10 different types who do. 
Chart Advisor
4 Stocks Still Flashing Buy Signals
In the midst of volatility and a big market selloff last week, these stocks are flashing buy signals. 
Technical Indicators
Understanding Trend Analysis
Trend analysis is the use of past performance to predict future price movement of a security. 
Trading Strategies
How To Buy Penny Stocks (While Avoiding Scammers)
Penny stocks are risky business. If want to trade in them, here's how to preserve your trading capital and even score the occasional winner.

Fintech
Fintech is a portmanteau of financial technology that describes ... 
Indicator
Indicators are statistics used to measure current conditions ... 
Intraday Momentum Index (IMI)
A technical indicator that combines aspects of candlestick analysis ... 
Forex Spread Betting
A category of spread betting that involves taking a bet on the ... 
Mass Index
A form of technical analysis that looks at the range between ... 
Money Flow Index  MFI
A momentum indicator that uses a stock’s price and volume to ...

Tame Panic Selling with the Exhausted Selling Model
The exhausted selling model is a pricing strategy used to identify and trade based off of the price floor of a security. ... Read Full Answer >> 
Point and Figure Charting Using Count Analysis
Count analysis is a means of interpreting point and figure charts to measure vertical price movements. Technical analysts ... Read Full Answer >> 
What assumptions are made when conducting a ttest?
The common assumptions made when doing a ttest include those regarding the scale of measurement, random sampling, normality ... Read Full Answer >> 
How is the value of a pip determined?
A pip in foreign exchange trading is a measure of a price movement in a currency pair. "Pip" is an acronym for price interest ... Read Full Answer >> 
How are double exponential moving averages applied in technical analysis?
Double exponential moving averages (DEMAS) are commonly used in technical analysis like any other moving average indicator ... Read Full Answer >> 
How do you know where on the oscillator you should make a purchase or sale?
Common oscillator readings to consider making a buy or sale are below 20 or above 80, respectively. More aggressive investors ... Read Full Answer >>